Free For A Limited Time!
Book Your PXG Custom Club Fitting Now

GAME-CHANGING GOLF IRONS

GEN6

£189

GEN5

£129

0317

£189

0211 XCOR2

£99

0311 GEN6

Gen6 Technology

PXG GEN6 Irons Thin Face Technology

VARIABLE ULTRA-THIN FACE

Since their inception, PXG irons have maintained the thinnest face in golf, and with GEN6 the face is now even thinner. Made from high-strength HT1770 maraging steel, the variable ultra-thin face measures a mere 0.050" (~1.27mm) thick — 15% thinner than previous models. Combined with PXG’s proprietary XCOR2 Technology, GEN6 Irons deliver the company’s highest C.O.R. performance ever, helping increase distance and forgiveness while also enhancing sound and feel.

GEN6 Iron XCOR2 Core

XCOR2 TECHNOLOGY

XCOR2 is PXG’s revolutionary polymer core material, the result of years of research and development. Extremely lightweight, XCOR2 helps reduce the mass of the core which enables more weight to be positioned low and to the perimeter of the backside of the clubhead, dramatically increasing MOI. Combined with PXG’s variable ultra-thin face technology, XCOR2 enhances the C.O.R. for extreme face deflection and out-of-sight ball speed.

GEN6 Iron Power Channel Technology

POWER CHANNEL TECHNOLOGY

Power Channel Technology is the proprietary U-shaped corridor built into the internal surface of the face to increase deflection and bend in the top sector. The channel creates face movement and transfers energy to simultaneously increases launch angle, trajectory, and ball speed.

Forge process for PXG irons

5X Forged

Each iron is forged five-times from 8620 soft carbon steel, creating a tight grain structure that increases its strength, prolonging the life of the grooves and enhancing the overall feel and appearance.

PXG GEN6 Irons Milled Back

Milled Back Surface

Milling the back surface of each iron is a high-precision process that reduces the wall thickness more than forging alone could achieve, to create a high-performance body design and an enhanced aesthetic.

OPTIMAL PERFORMANCE

Backed by industry-leading engineering and a relentless pursuit of performance, PXG 0311 P GEN6 Irons provide an ideal balance between workability and forgiveness. These irons feature PXG’s patented XCOR2 material, moderate offset, and breakthrough head design with a clean aesthetic. GEN6 Irons advance our original flagship forward and offer an exceptional blend of distance, workability, and forgiveness.


Available in Chrome, Xtreme Dark finish and two new finishes: Double Chrome and Double Black.

4 Finishes for GEN6 Irons

0311 P

Close-up of 0311 P Iron

Designed For

Workability

Forgiveness

CLUB PROFILE

Midsize head with moderate offset, providing a balance of distance, workability, and forgiveness.

0311 XP

Close-up of 0311 XP Iron

Designed For

Workability

Forgiveness

CLUB PROFILE

Larger head with more offset, engineered for maximum distance and forgiveness.

0311 GEN5

GEN5 Technology

XCOR2 GEN5 Irons Technology

XCOR2 Technology

A result of years of research and development, XCOR2 is PXG’s revolutionary polymer core material, designed specifically for GEN5 Irons. Extremely lightweight, XCOR2 helps reduce the mass of the core. This enables more weight to be positioned low and to the perimeter of the backside of the clubhead, dramatically increasing MOI and forgiveness. Combined with our ultra-thin face technology, XCOR2 enhances the C.O.R. for extreme face deflection and out of sight ball speed.

THIN FACE GEN5 IRON TECH

The Thinnest Face in Golf

The clubface is made from an HT 1770 maraging stainless steel using a cold roll manufacturing process combined with an aged heat treatment method. This produces an extremely tight grain structure and higher-strength performance than what can be achieved through the traditional forging process. This advanced material and process is one of the attributes that enables PXG to deliver the thinnest clubface in golf, measuring a mere 0.058" (~1.55mm) thick.

GEN5 Iron Weighting Technology

Precision Weighting

GEN5 Irons feature five tungsten heel/toe weights and one large weight located near the CG on the back of the clubhead. The large center weight can be used to achieve optimal swing weight. Customers can experience Precision Weighting Technology adjustments during their in-person fitting with a PXG Fitting Specialist. Weighting is not intended to be adjusted after purchase.

GEN5 Irons Power Channel Technology

POWER CHANNEL TECHNOLOGY

Power Channel Technology is the proprietary U-shaped corridor built into the internal surface of the face to increase deflection and bend in the top sector. The channel creates face movement and transfers energy to simultaneously increases launch angle, trajectory, and ball speed.

GEN5 T

Close-up of Gen5 T Iron

Designed For

Workability

Forgiveness

Club Profile

Tour Inspired - minimal topline and offset contribute to a workable, but still forgiving design

GEN5 P

Close-up of Gen5 P Iron

Designed For

Workability

Forgiveness

CLUB PROFILE

A Balanced Design - forgiving, yet pleasing to the eye, topline and blade length with a small amount of offset

GEN5 XP

Close-up of Gen5 XP Iron

Designed For

Workability

Forgiveness

CLUB PROFILE

A Forgiving Design – Higher offset combined with a larger topline and blade length built for maximum forgiveness and distance

0317 Irons

0317 Technology

PXG 0317 ST Irons Milled Face & Back

Milled Face & Back

Milling the face and back surfaces is a high-precision process, unobtainable through forging alone, that ensures every line, curve, and angle are produced to exacting specifications to create a high-performance body design and enhancing aesthetics.

0317 Precision Weighting

Precision Weighting

One large weight is located near the CG on the back of the clubhead. This large center weight can be used to achieve optimal swing weight. Unique to PXG, customers can experience the benefits of these adjustments during an in-person fitting. Weighting is not intended to be adjusted after purchase. 

Forge process for PXG irons

3X Forged Feel

Each iron is three-times forged from 8620 soft carbon steel, creating a tight grain structure that increases its strength, prolonging the life of the grooves and enhancing the overall feel and appearance.

Close up of iron with PXG precision robotic polishing.

Robotic Precision

0317 Irons undergo a precision robotic polishing process. Robotic polishing creates an extremely precise manufacturing process that supports consistent sole and face perimeter geometry with every club.

PXG 0317 ST Xtreme Dark Finish

Xtreme Dark Finish

PXG’s stunning Xtreme Dark irons are created using an advanced process called Diamond-like Carbon (DLC) coating. DLC significantly extends the reasonable lifetime of the finish. Unlike the typical black PVD used by other equipment manufacturers, DLC is a three-layer process that produces extraordinary wear resistance without influencing club performance.

0317 Tour

Close up of 0317 T Players Iron

Designed For

Workability

Forgiveness

CLUB PROFILE

Slightly larger profile designed for increased spin performance, distance control and overall consistency

Model Characteristics

Hollow Bodied Polymer Filled

0317 Cavity Back

Close up of 0317 CB Players Iron

Designed For

Workability

Forgiveness

CLUB PROFILE

Compact shape with minimal topline and offset designed for max control with added forgiveness

Model Characteristics

Solid Bodied Cavity Back

0317 Milled Blades

Close up of 0317 ST Players Iron

Designed For

Workability

Forgiveness

CLUB PROFILE

Tour inspired shape with minimal topline and offset designed for max control and feel

Model Characteristics

Solid Bodied Muscle Back Blade

0317 X Driving

PXG 0317 X Driving Iron

Designed For

Workability

Forgiveness

Available Iron

2 Iron (able to bend to 1 or 3-iron with a fitting)

Model Characteristics

Hollow Bodied Polymer Filled

0211 XCOR2

0211 Technology

PXG Iron Power Channel Technology

POWER CHANNEL TECHNOLOGY

Power Channel Technology is the proprietary U-shaped corridor built into the internal surface of the face to increase deflection and bend in the top sector. The channel creates face movement and transfers energy to simultaneously increases launch angle, trajectory, and ball speed.

PXG Iron XCOR2 Technology

XCOR2 Technology

A result of years of research and development, XCOR2 is PXG’s revolutionary polymer core material. Extremely lightweight, XCOR2 helps reduce the mass of the core. This enables more weight to be positioned low and to the perimeter of the backside of the clubhead, dramatically increasing MOI and forgiveness. Combined with our ultra-thin face technology, XCOR2 enhances the C.O.R. for extreme face deflection and out of sight ball speed.

PXG Iron Ultra-Thin Face

Ultra-Thin Face

The clubface is made from an HT 1770 maraging stainless steel using a cold roll manufacturing process combined with an aged heat treatment method. This produces an extremely tight grain structure and higher-strength performance than what can be achieved through the traditional forging process. This advanced material and process is one of the attributes that enables PXG to deliver the thinnest clubface in golf, measuring a mere 0.058" (~1.55mm) thick.

0211 XCOR2

PXG 0211 XCOR2

Designed For

Workability

Forgiveness

CLUB PROFILE

A Balanced Design - forgiving, yet pleasing to the eye, topline and blade length with a medium amount of offset

Model Comparison

Features GEN6 GEN5 0211 0317
Thinnest Face In Golf  
XCOR2 Core      
Robotic Polishing        
Forged      
Milled Face  
Milled Back      
Fitting Complete Customization Complete Customization Limited to shaft & lie/loft customizations Complete Customization
Head Shapes 2 3 1 3
Adjustable Weighting  
Center Weight
 
Center Weight
 
Center Weight

Irons FAQs

While there are several high-performance golf iron sets on the market, we believe the PXG 0311 GEN6 irons provide the most distance, accuracy and forgiveness, with a sound and feel that is simply beyond compare. Visit a PXG Fitting Studio and see for yourself why we think our 0311 GEN6 irons are the best golf irons.

The cost of a PXG golf iron set (8 golf clubs) depends on the club. Our 0211 Irons are typically at a lower price point, and our latest generation irons are at the higher end. The price varies based on the type of clubs purchased and the chosen customizations (shaft, grip, finish, etc.). From entry-level iron sets to tour-level professional golf irons, the price will differ for each PXG iron set.

Traditionally, there are eight golf irons in a set. These clubs range from pitching wedge to 3-iron. PXG irons can be purchased as a set or individually. If you’re ready to take the next step in your golf game, a full set of golf irons from PXG should be at the top of your list. At PXG, we also offer hybrids and driving irons, which could be added to your iron set.