0317 Tour
Player Type
Low handicap players
Club Profile
Slightly larger profile designed for increased spin performance, distance control and overall consistency
0317 Cavity Back
Player Type
Low handicap players
Club Profile
Compact blade designed for shot making and consistency with added forgiveness
0317 Milled Blades
Player Type
Low handicap players
Club Profile
Tour inspired blade designed for maximum shot making and consistency
PXG 0317 Iron Specs
| Club | Loft | Standard Length | Standard Lie | Offset | Bounce |
|---|---|---|---|---|---|
| 3 | 20° | 39.5" | 60.5° | 0.150 | 5° |
| 4 | 22.5° | 38.875" | 61° | 0.130 | 6° |
| 5 | 25° | 38.25" | 61.5° | 0.110 | 7° |
| 6 | 28° | 37.625" | 62° | 0.090 | 8° |
| 7 | 32° | 37" | 62.5° | 0.075 | 9° |
| 8 | 36° | 36.5" | 63° | 0.060 | 10° |
| 9 | 41° | 36" | 63.5° | 0.040 | 12° |
| W | 46° | 35.75" | 64° | 0.020 | 14° |
| G | 51° | 35.5" | 64° | 0.015 | 14° |
| Club | Loft | Standard Length (inches) | Standard Lie | Offset (inches) | Bounce |
|---|---|---|---|---|---|
| 3 | 21° | 39.5" | 60.5° | .135" | 4° |
| 4 | 24° | 38.875" | 61° | .120" | 5° |
| 5 | 27° | 38.25" | 61.5° | .105" | 6° |
| 6 | 30° | 37.625" | 62° | .090" | 7° |
| 7 | 33° | 37" | 62.5° | .075" | 8° |
| 8 | 37° | 36.5" | 63° | .060" | 10° |
| 9 | 42° | 36" | 63.5° | .045" | 12° |
| W | 46° | 35.75" | 64° | .030" | 14° |
| G | 50° | 35.5" | 64° | .020" | 14° |
Blade Length
0317 Tour
Slightly longer blade length sized for maximum performance
0317 Cavity Back
Larger than Milled Blades, yet still compact
.png?sw=437&q=80)
0317 Milled Blade
Smaller blade size for maximum workability
OFFSET
0317 Tour
0317 T Irons have a similar offset to Milled Blades/Cavity Back.
0317 Cavity Back
0317 Milled Blades & Cavity Back have the same amount of minimal offset
0317 Milled Blade
0317 Milled Blades & Cavity Back have the same amount of minimal offset
TOP RAIL THICKNESS
0317 Tour
Thicker top line
0317 Cavity Back
Slightly thicker top line
0317 Milled Blade
Thinner top line
SOLE WIDTH
0317 Tour
Similar tapered sole design with tailing edge relief
0317 Cavity Back
Wider sole for added forgiveness
0317 Milled Blade
Thinner sole for maximum control
Shared Technology
Milled Face & Back
Milling the face and back surfaces is a high-precision process, unobtainable through forging alone, that ensures every line, curve, and angle are produced to exacting specifications to create a high-performance body design and enhancing aesthetics.
Precision Weighting
One large weight is located near the CG on the back of the clubhead. This large center weight can be used to achieve optimal swing weight. Unique to PXG, customers can experience the benefits of these adjustments during an in-person fitting. Weighting is not intended to be adjusted after purchase.
3X Forged Feel
Each iron is three-times forged from 8620 soft carbon steel, creating a tight grain structure that increases its strength, prolonging the life of the grooves and enhancing the overall feel and appearance.
Robotic Precision
0317 Players Irons undergo a precision robotic polishing process. Robotic polishing creates an extremely precise manufacturing process that supports consistent sole and face perimeter geometry with every club.
Xtreme Dark Finish
PXG’s stunning Xtreme Dark irons are created using an advanced process called Diamond-like Carbon (DLC) coating. DLC significantly extends the reasonable lifetime of the finish. Unlike the typical black PVD used by other equipment manufacturers, DLC is a three-layer process that produces extraordinary wear resistance without influencing club performance.
