Are you sure you want to leave checkout?
Go to home page
Dear customer, you will now be redirected to the page www.pxg-shop.eu managed by our independent sales partner HoleInOne Fitting GmbH. Parsons Xtreme Golf LLC is not responsible for the content of this site or for the conduct of HoleInOne Fitting GmbH. Thank you for your interest in PXG!
See how our 0811 GEN2 Drivers stack up against the competition
Featuring Hot Rod Technology inspired by the look and extreme performance of American muscle cars, the PXG 0811 XF GEN2 Golf Driver is designed for out-and-out forgiveness and raw power.
The 0811 XF GEN2 Driver presents the same performance-enhancing technology as the 0811 X GEN2 Driver, with a deeper CG location and a weight back design. This promotes mid-spin performance and increases the MOI.
Five weight ports in the sole support trajectory tuning and create the opportunity for the overall assembled mass to be adjusted.
Adjustable hosel can change the loft (+/-) 1½ degrees to optimize the trajectory.
Weight back design creates a deep center of gravity (CG) position, producing higher launch conditions and an exceptionally high MOI that teeters on the brink of USGA limits.
The PXG 0811 XF GEN2 Golf Driver features a multi-level, variable thickness carbon fiber crown design. The stiff carbon fiber construction reduces energy loss, yielding faster ball speeds, and helps reinforce the face structure for improved consistency.
The dynamic visual styling of the crown, including a high-performance anti-glare finish, eliminates distractions at address, subliminally aids alignment for more centered and consistent ball striking and enhances aerodynamics.
The carbon fiber crown saves approximately 15 grams of mass from the top of the club head that can be redistributed in the sole, helping to lower the CG position and optimize ball flight.
The high-strength titanium alloy face used in the 0811 XF GEN2 Driver supports a thin face construction. The variable design further optimizes the face to promote faster ball speeds.
The 0811 X GEN2 Driver is designed with a honeycomb TPE insert. TPE, also used in PXG GEN1 Irons and Drivers, is a high-performance vibration-dampening polymer that enhances the golf club’s sound and feel. The honeycomb structure helps reduce the mass of the dampening structure, allowing for more weight to be repositioned around the sole of the club to optimize launch conditions.
Precision Weighting Technology distributes club head mass through a series of weights to increase MOI. The 0811 XF GEN2 Driver has interchangeable high-density tungsten weights (4.1g or 2.5g) and low-density titanium weights (0.8g), allowing for a head weight that is adjustable between 195-217 grams. Fine-tuning will alter the initial launch conditions allowing the golfer to achieve the best possible results without changing his or her swing.
This weight distribution positions the mass toward the heel of the club head in a draw biased setting to help players square the club face more easily.
This weight distribution positions the mass towards the toe of the club head to maximize the MOI and shift the club from a draw bias to a more neutral directional setting.
PXG clubs are customized and built to maximize performance on the course and increase your enjoyment of the game. Let a PXG Fitting Specialist “dial in” your PXG clubs at a course near you.
Nobody makes golf clubs the way we do. Period.®
Please fill in all fields to proceed.