Are you sure you want to leave checkout?
Go to home page
Dear customer, you will now be redirected to the page www.pxg-shop.eu managed by our independent sales partner HoleInOne Fitting GmbH. Parsons Xtreme Golf LLC is not responsible for the content of this site or for the conduct of HoleInOne Fitting GmbH. Thank you for your interest in PXG!
See how our 0811 GEN2 Drivers stack up against the competition
The PXG 0811 X GEN2 Driver features Hot Rod Technology inspired by the look and extreme performance of American muscle cars.
The golf club head’s innovative carbon fiber crown combined with the weight-forward design supports low spin performance, blazing fast ball speed and breathtaking distance fine-tuned for forgiveness and accuracy.
Nine weights provide a significant amount of moveable mass in the golf club head that can be easily adjusted to influence head weight, spin and bias.
Adjustable hosel can change the loft (+/-) 1½ degrees to optimize the trajectory.
Supports an extremely low CG position, approximately 0.160” below the neutral axis. This promotes low spin performance and helps improve both distance and accuracy.
The PXG 0811 X GEN2 Driver features a multi-level, variable thickness carbon fiber crown design. The stiff carbon fiber construction reduces energy loss, yielding faster ball speeds, and helps reinforce the face structure for improved consistency.
The dynamic visual styling of the crown, including a high-performance anti-glare finish, eliminates distractions at address, subliminally aids alignment for more centered and consistent ball striking and enhances aerodynamics.
The carbon fiber crown saves approximately 12 grams of mass from the top of the club head that can be redistributed in the sole, helping to lower the CG position and optimize ball flight.
The high-strength titanium alloy face used in the 0811 X GEN2 Driver supports a thin face construction. The variable design further optimizes the face to promote faster ball speeds.
The 0811 X GEN2 Driver is designed with a honeycomb TPE insert. TPE, also used in PXG GEN1 Irons and Golf Drivers, is a high-performance vibration-dampening polymer that enhances the club’s sound and feel. The honeycomb structure helps reduce the mass of the dampening structure, allowing for more weight to be repositioned around the sole of the club to optimize launch conditions.
Precision Weighting Technology keeps club head mass distributed through a series of weights to increase MOI. The 0811 X GEN2 Driver has nine weights - platinum colored weights are made of high-density tungsten (4.1g or 2.5g) and black weights made of low-density titanium (0.8g). Fine-tuning will alter the initial launch conditions allowing the golfer to achieve the best possible results without changing his or her swing.
This weight distribution positions the mass equally around the club head.
This weight distribution positions the mass towards the back of the club head and has the effect of producing a higher trajectory with approximately 200-400 rpm more spin.
This weight distribution positions the mass toward the front of the club head producing a lower launch with approximately 200-400 rpm less spin.
This weight distribution positions the mass towards the heel of the club head and has the effect of producing a more draw-biased shot. This setting also helps players square the club face more easily.
PXG clubs are customized and built to maximize performance on the course and increase your enjoyment of the game. Let a PXG Fitting Specialist “dial in” your PXG clubs at a course near you.
Nobody makes golf clubs the way we do. Period.®
Please fill in all fields to proceed.