Extreme Power & Forgiveness
Killer LooksKiller Performance
Next Level Performance
Tour Caliber Performance
Confidence & Consistency
Far & Away Forgiveness
High-Speed, Low Profile
Fast & Forgiving
Simply Sweet Shots
A Feat of Engineering
100% Milled, Calculated Accuracy
100% Milled and Precision Engineered
The Stable Blade
Attention To Detail
Small but Mighty
Clean & Efficient
Modern & Lightweight
Steady & Smooth
Are you sure you want to leave checkout?
Go to home page
Upgrade to a modern browser (e.g., Microsoft Edge, Google Chrome, or Firefox) for the best experience on this site
Need help? Player Support is available at firstname.lastname@example.org
XCOR is the result of a multi-year research and development project. Created specifically for use in our irons, the proprietary polymer material is bunny rabbit soft and off-the-charts explosive. Highly compressible, delivering more face movement and a colossal sweet spot.
PXG’s stunning Xtreme Dark irons and wedges are created using an advanced process called Diamond-like carbon (DLC) coating. DLC creates a hard, graphite-like, carbon-based coating that significantly extends the reasonable lifetime of our Xtreme Dark finish. Unlike the typical black PVD used by other equipment manufactures DLC is a three-layer process that includes a chromium base, a carbon-chromium mid layer, a high-carbon top layer that is approximately 3/25,000 of an inch thick. This produces extraordinary wear resistance and a flawless look without influencing club performance relative to how the ball reacts.
Each iron is 5x forged from 8620 soft carbon steel, creating a tight grain structure that increases its strength, prolonging the life of the grooves and enhancing the overall feel and appearance.
Milling the back surface of each iron is a high-precision process, unobtainable through forging alone, that ensures every line, curve, and angle are produced to exacting specifications to create a high-performance body design and enhancing aesthetics.
Made from high strength HT1770 maraging steel and measuring a mere 0.058” (≈1.55mm) thick, PXG presents the thinnest face in golf. Combined with our proprietary XCOR Technology, the ultra-thin face delivers unbelievable forgiveness and our highest C.O.R performance ever!
The Precision Weighting Technology, inspired by the outstanding adjustability of our metal woods and putters, presented in GEN4 Irons features a large weight located near the CG on the back of the clubhead. The weight can be adjusted in 2-gram increments during a fitting to allow golfers to experience various head weight configurations and achieve optimal personalized performance. Weighting is not intended to be adjusted after purchase.
— from ¥18,700
If you would like advice to perfect your fitting, please contact our PXG Fitting Experts at email@example.com
Drop a Hint
All prices and product availability are subject to change and revision from time to time without prior notice due to pricing or availability in other markets or currency fluctuation.
PXG Products bought thru PXG Japan are assembled in Japan.
For a limited time, PXG is offering free expedited shipping when you purchase 7 or more 0211's or Gen2 Irons. Expedited Shipping will be applied during the checkout process when the correct conditions are met.
C-Grind: Designed to perform in firm turf conditions, the C-Grind features a narrow sole and aggressive taper from heel to toe, delivering moderate bounce. Ideal for skilled golfers hitting creative shots around the green.
BP-Grind: Designed for lush turf conditions, deep sand traps and golfers with a steeper attack angle, the BP-Grind features a wider sole and slight taper from heel to toe, delivering additional bounce and maximum forgiveness.
Loft: Loft is the angle measured between the face and a vertical plane. Stronger lofts will create lower launch angles and spin rates, while weaker lofts will produce a higher launch and spin ball flight. Our irons are designed with loft specifications that fit the majority of players of all levels. We recommend standard loft unless a player has been through a full fitting with a PXG fitter.
Lie: Lie is the angle measured between the shaft and the ground plane at impact. Lie angle is adjusted based on a player’s physical stature as well as his or her swing characteristics to make the head level at impact.
Length: Club length is determined by your physical stature as well as your consistency. Generally, longer clubs will add more speed but will also increase the dispersion pattern.
GRAPHITE: Graphite iron shafts are vibration dampening, light weight options. They produce a softer feel as well as higher launch and more speed for improved distance.
STEEL: Steel iron shafts are designed to maximize consistency and provide a stable feel for stronger players. Steel shafts are generally heavier than graphite and are available in a variety of weights and stiffness profiles to help optimize your launch conditions.
PXG’s stunning Xtreme Dark irons and wedges are created using an advanced process called Diamond-like carbon (DLC) coating. DLC creates a hard, graphite-like, carbon-based coating that significantly extends the reasonable lifetime of our Xtreme Dark finish.
Recommended for players who CONSISTENTLY hit their 7 iron:
Beginning golfers who are not in the L or A shaft flex category should select R: Regular Flex Shafts.
All fields are required.
There was an issue sending the hint email. Please verify you've input a valid email. First and Last names are required in name fields.
____ has been eyeing this and wanted you to know it’s officially on their wish list.
We agree... It's basically the perfect gift.
Please complete your email newsletter sign-up and be one of the first to discover updates on PXG's equipment and tour players.
Please verify your email is properly entered.
First name is required.
Last name is required.
Phone number is required.
Postal code is required.